Information
About Our Chemicals
Our products are of the highest quality you can buy. Beware of cheaper less grade products.
We are the only true replacement of Red Devil Lye.
Customer Reviews
VERY PROFESSIONAL SELLER !! THANK YOU !!
great! very fast shipping, thanks and will buy for you again
GREAT PRODUCT! FAST SHIPPING!!!!Read More
Copyright 2007 BiodieselBarn.com
www.biodieselbarn.com - We provide you with excellent quality Sodiumhydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.
We sell Red Devil High Quality - Sodium Hydroxide and Potassium Hydroxide.
We also carry Tanks, Drum Filters Strainers. We offer low Prices and Fast Shipping. www.biodieselbarn.com covers USA, Canada, United Kingdom, Germany, Spain and Finland. 'www.biodieselbarn.com - We provide you with excellent quality Sodium hydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.'
DieselCraft Centrifuge
PRODUCTS
Biodiesel and Soap Making Supplies
BIODIESEL BARN
[an error occurred while processing this directive]
What does it do?
Dewater Biodiesel - WVO - Remove Soap - Clean Biodiesel - WVO - Engine Oils - Hydraulic Fluids - Diesel Fuels Cleans Contaminant Particles Size Less than 1 Micron!
How Does it Works?
The way the centrifuge works is the oil goes in the side of the centrifuge then is channeled up through the center shaft into the rotor. The spinning rotor sends the contamination to the outside of the rotor leaving the oil to rise to the center of the rotor housing near the shaft. The oil then "overflows" into the lower compartment and is pushed out through two jets into the outer housing where it drains back into your tank. The oil is under pressure when it goes through the jets which provide the force to spin the rotor housing.For proper centrifuge operation the oil must be heated to 140-180 F. Multiple passes will be needed depending on the degree of contamination. Our Heat Exchangers provide a fast, safe way to heat your oil and still give maximum portability.
In most cases "rough" filtering with a 100-150 Micron strainer is required initially. Then 3-4 turns of the volume through the centrifuge in most cases will give optimum results and a better finished product,
Biodiesel Barn can also help with turn key ready to go centrifuge systems. No assembly or scrounging required, just slide it up next to a drum, drop in the suction line, plug in the motor and flip the switch and your cleaning biodiesel. The frame is stamped from 12 gauge steel and poweder coated for durability. There are three models, the OPS20 capable of cleaning 55 gallons per hour, the OPS50 capable of cleaning 108 gallons per hour, and the OPS50X2 capable of cleaning 216 gallons per hour.
B U Y D I R E C T and S A V E
CONTACT US: biodieselbarn@comcast.net
