OC50 Dieselcraft Centrifuge Kits Pumps and Parts
What does it do?
Dewater Biodiesel - WVO - Remove Soap - Clean Biodiesel - WVO - Engine Oils - Hydraulic Fluids - Diesel Fuels Cleans Contaminant Particles Size Less than 1 Micron!
How Does it Works?
The way the centrifuge works is the oil goes in the side of the centrifuge then is channeled up through the center shaft into the rotor. The spinning rotor sends the contamination to the outside of the rotor leaving the oil to rise to the center of the rotor housing near the shaft. The oil then "overflows" into the lower compartment and is pushed out through two jets into the outer housing where it drains back into your tank. The oil is under pressure when it goes through the jets which provide the force to spin the rotor housing.For proper centrifuge operation the oil must be heated to 140-180 F. Multiple passes will be needed depending on the degree of contamination. Our Heat Exchangers provide a fast, safe way to heat your oil and still give maximum portability.
In most cases "rough" filtering with a 100-150 Micron strainer is required initially. Then 3-4 turns of the volume through the centrifuge in most cases will give optimum results and a better finished product,
Information
About Our Chemicals
Our products are of the highest quality you can buy. Beware of cheaper less grade products.
We are the only true replacement of Red Devil Lye.
Customer Reviews
VERY PROFESSIONAL SELLER !! THANK YOU !!
great! very fast shipping, thanks and will buy for you again
GREAT PRODUCT! FAST SHIPPING!!!!Read More
Copyright 2007 BiodieselBarn.com
www.biodieselbarn.com - We provide you with excellent quality Sodiumhydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.
We sell Red Devil High Quality - Sodium Hydroxide and Potassium Hydroxide.
We also carry Tanks, Drum Filters Strainers. We offer low Prices and Fast Shipping. www.biodieselbarn.com covers USA, Canada, United Kingdom, Germany, Spain and Finland. 'www.biodieselbarn.com - We provide you with excellent quality Sodium hydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.'
DieselCraft Centrifuge
PRODUCTS
ORDER BY PHONE 1.800.517.4707
Biodiesel and Soap Making Supplies
BIODIESEL BARN
OC50 Dieselcraft
Centrifuge Kit
$499.00
OC50 Dieselcraft
Spare Rotor
$125.00
OC50 Dieselcraft
Pump and Motor
$549.00
The OC20 and OC50 Biodiesel Kits come with a Control Valve Manifold and a Universal Mounting Bracket. The Control Valve Manifold lets you control the centrifuge giving you the ability to turn the centrifuge off and on with a simple ball valve. The Universal Mounting Bracket has 1-1/4" threads on the output of the centrifuge, letting you connect a drain using NPT pipe fittings. The bracket also has several mounting holes for attaching the centrifuge to either horizontal or vertical surfaces.
The Control valve Manifold includes a high quality stainless steel oil filled pressure gauge.
Model OC-50
Flow rate: 1.8 GPM or 108 gallons per hour
Measures 5.4” Diameter by 9.8” Tall
Supplied Universal mounting plate is 3” wide x 7” long with a flange mount with two ½ holes and a 1” NPT female coupling for affixing the return line.
Rotor holding capacity: 20 oz of contamination.
Dieselcraft Model OC-50: uses an industrial quality gear pump mounted to a 1/3 hp carbonator-style motor.
Pump Features: 2.1 GPM maximum flow, 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts, carbon sleeve bearings, mechanical seal, internal adjustable pressure relief valve (factory set for 90 PSI), ¼” FNPT ports, includes motor drive pin and motor mounting clamp.
Motor Features: 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, rigid base mount, automatic thermal overload protection, no power cord, reversible rotation.
Biodiesel Plans
Biodiesel Processors
586-677-3054
B U Y D I R E C T and S A V E
