What does it do?
Dewater Biodiesel - WVO - Remove Soap - Clean Biodiesel - WVO - Engine Oils - Hydraulic Fluids - Diesel Fuels Cleans Contaminant Particles Size Less than 1 Micron!
How Does it Works?
The way the centrifuge works is the oil goes in the side of the centrifuge then is channeled up through the center shaft into the rotor. The spinning rotor sends the contamination to the outside of the rotor leaving the oil to rise to the center of the rotor housing near the shaft. The oil then "overflows" into the lower compartment and is pushed out through two jets into the outer housing where it drains back into your tank. The oil is under pressure when it goes through the jets which provide the force to spin the rotor housing.For proper centrifuge operation the oil must be heated to 140-180 F. Multiple passes will be needed depending on the degree of contamination. Our Heat Exchangers provide a fast, safe way to heat your oil and still give maximum portability.
In most cases "rough" filtering with a 100-150 Micron strainer is required initially. Then 3-4 turns of the volume through the centrifuge in most cases will give optimum results and a better finished product,
Information
About Our Chemicals
Our products are of the highest quality you can buy. Beware of cheaper less grade products.
We are the only true replacement of Red Devil Lye.
Customer Reviews
VERY PROFESSIONAL SELLER !! THANK YOU !!
great! very fast shipping, thanks and will buy for you again
GREAT PRODUCT! FAST SHIPPING!!!!Read More
Copyright 2007 BiodieselBarn.com
www.biodieselbarn.com - We provide you with excellent quality Sodiumhydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.
We sell Red Devil High Quality - Sodium Hydroxide and Potassium Hydroxide.
We also carry Tanks, Drum Filters Strainers. We offer low Prices and Fast Shipping. www.biodieselbarn.com covers USA, Canada, United Kingdom, Germany, Spain and Finland. 'www.biodieselbarn.com - We provide you with excellent quality Sodium hydroxide, Potassium hydroxide Potash KOH and Red devil lye sodium in addition to Caustic soda beads Pellets.'
DieselCraft Centrifuge
PRODUCTS
Biodiesel and Soap Making Supplies
BIODIESEL BARN
[an error occurred while processing this directive]
Cleaning rate: 55 gallons per hour
Measures 12” wide by 42” tall and 16” deep to stand next to a 55 gallon drum.
Shipping weight: 85 pounds
Rotor holding capacity: 10.5 oz of contamination.
Pump and Motor Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with only two weld joints and polyester powder coating
Maximum Operating Temperature of the pump is 210 degrees F/ 90c
OPS 20 Centrifuge Kit
$1925.00
OPS 50 Centrifuge Kit
$2150.00
Cleaning rate: 108 gallons per hour
Measures 12” wide by 42” tall and 16” deep to stand next to a 55 gallon drum.
Shipping weight: 100 pounds
Rotor holding capacity: 20 oz of contamination.
Pump and Motor Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts and mechanical seal. Motor is 1/3 hp USA manufactured carbonator-mount motor, 115V-60Hz-1 phase, 1750 rpm, open, drip-proof enclosure, automatic thermal overload protection. Frame is a 12 gage steel fully formed structure with only two weld joints and polyester powder coating
Maximum Operating Temperature of the pump is 210 degrees F/ 90c
$3300.00
OPS 50 x 2 Centrifuge Kit
Cleaning rate: 216 gallons per hour
Measures 12” wide by 42” tall and 24” deep to stand next to a 55 gallon drum.
Shipping weight: 135 pounds
System holding capacity: 40 oz of contamination.
Pump Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts. Motor Features: 1 hp US manufactured electric motor, 115/230V-60Hz-1 phase, 1750 rpm, TEFC enclosure Frame is a 12 gage steel fully formed structure with only two weld joints and polyester powder coating
Maximum Operating Temperature of the pump is 210 degrees F/ 90c
B U Y D I R E C T and S A V E
Oil Processing Units are built when the order is placed. Please allow time to process order, build time and shipping time.
CONTACT US: biodieselbarn@comcast.net
